• Do not let the power cable come into contact with the hot parts of the appliance
• Never leave the appliance unattended when it is connected to the mains
• Do not immerse the appliance in water or other liquids
• Do not exceed the maximum filling volume indicated on the appliance
• Do not use the appliance if the water tank has not been filled
  
• Do not use the same capsule more than once
  
• Only use official Lavazza A Modo Mio capsules in the appliance 
  
• Do not use the appliance outdoors
  
• Only insert Lavazza A Modo Mio capsules or capsules compatible with Lavazza A Modo Mio System into the capsule compartment. Do not place your fingers or any other objects in the capsule compartment
• In the event of breakdowns immediately disconnect the plug from the socket. Do not operate a faulty machine
• Only Lavazza authorized service centers can carry out interventions and repairs
  
• In the event of repairs not carried out by authorized Lavazza centers, no liability is accepted for any damage

Limescale formation is a normal occurrence when using your coffee machine and will result in reduced water flow or cold coffee. For this reason, you will need to descale the machine every three months or so, and in any case everytime the descaling light on the appliance is switched on (for machine models equipped with descaling alert). If you live in an area where hard water is prevalent, then the descaling maybe required to be completed more frequently. Lavazza assumes no responsibility for damage to the machine resulting from failure to descale.

To complete the descaling process, use a non-toxic and/or non-harmful type of descaling product for coffee machines, commonly available on the market.

Do not drink the descaling solution and liquids that have run through the machine until the cycle is complete.

Never use vinegar as a descaling agent.

Since the descaling steps are different depending on the machine model, we invite you to see the user manuals on following Machine Page:

Voicy

Desea

Idola 

Jolie 

Jolie & Milk 

• Remove and rinse the water tank.
• Fill the water tank up to the MAX level, using only fresh, still drinking water.
• Refit the tank.
• Plug the power cord into a power outlet socket.
• Press the on/brew switch to turn on the machine.
• Wait until the machine has completed the heating cycle. The machine is ready when the on/brew switch lights up with a steady light.
• Before brewing coffee, run at least one water tank of water through the appliance, without any capsules in the machine.
• Now you're ready to taste your blends using the capsules. Enjoy your coffee!